background image

MA410T-EU-EN-V1.0-7/12 

Introduction 

Thank you for selecting the Extech MA410 Clamp Meter. This meter measures AC Current, AC/DC 
Voltage, Resistance, Capacitance, Frequency, Diode Test, Duty Cycle and Continuity. Custom 
features include Thermocouple Temperature and Non-Contact Voltage detection. The double molded 
case is designed for heavy duty use. This meter is shipped fully tested and calibrated and, with proper 
use, will provide years of reliable service. Extech Instruments is an ISO-9001 Certified company. 

Safety 

International Safety Symbols 

This symbol, adjacent to another symbol or terminal, indicates the user must refer 
to the manual for further information. 
 
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous 
voltages may be present 
 
Double insulation 

 

This 

WARNING

 symbol indicates a potentially hazardous situation, which if not 

avoided, could result in death or serious injury. 

This 

CAUTION

 symbol indicates a potentially hazardous situation, which if not 

avoided, may result damage to the product. 

 
 
 

PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY 

OVERVOLTAGE CATEGORY I 

Equipment of OVERVOLTAGE CATEGORY I is equipment for connection to circuits in which 
measures are taken to limit the transient over voltages to an appropriate low level. 
Note – Examples include protected electronic circuits. 

OVERVOLTAGE CATEGORY II 

Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from 
the fixed installation. 
Note – Examples include household, office, and laboratory appliances. 

OVERVOLTAGE CATEGORY III 

Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations. 
Note – Examples include switches in the fixed installation and some equipment for industrial use 
with permanent connection to the fixed installation. 

OVERVOLTAGE CATEGORY IV 

Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the installation. 
Note – Examples include electricity meters and primary over-current protection equipment

 

WARNING 

CAUTION 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание MA410T











Отзывы: