6
SAMPLE KEY
Used to set a sample count number into memory. When a known number of pieces are set on
the platform, the number would be programmed and then the SAMPLE key would be pressed
to store the number.
CLEAR KEY (CE)
Used to cancel a numeric programming entry or to cancel unit weight data.
CHECK KEY
Used to toggle between Normal counting and Check operations.
MEMORY KEY (M+)
Stores accumulated count data when pressed.
CANCEL MEMORY KEY (CM)
Press to clear the memorized data.
TOTAL KEY
Press to toggle between normal operation and recalling stored data.
Tare Operation
Before beginning, confirm that the ZERO indicator (small down arrow on bottom left of the WEIGHT
LCD ) is ON and the weight display reads zero. If the indicator and the display do not show zero,
press the ZERO key and observe again. Use one of the two following Tare methods:
Push-button Tare
1. Place the Tare weight on the platform.
2. Press the TARE key. The NET down-arrow indicator will appear on the bottom right hand side
of the WEIGHT LCD (LCD on left) and the WEIGHT display will read zero.
3. Remove the Tare weight from the platform. The WEIGHT display will indicate a negative
reading. The reading will be negative in the amount of the TARE weight.
4. When objects are weighed, the reading will be the object weight minus the TARE value.
5. To remove the previous Tare value from memory, remove the weight from the Scale platform
and press the TARE key so that the NET indicator turns off and the WEIGHT display returns to
zero.
Keypad Tare
1. Set the known weight of the Tare object using the numeric and decimal keys on the Scale’s
keypad. Use the PIECE WEIGHT LCD (center) to observe the weight as it’s being entered.
2. Press the TARE key. The NET indicator will illuminate on the WEIGHT LCD and the WEIGHT
display will indicate a negative reading. The reading will be negative in the amount of the
TARE weight.
3. When objects are weighed, the reading will be the weight minus the TARE value.
4. To remove the previous Tare value from memory, Remove the weight from the Scale platform
and press the TARE key so that the NET indicator turns off and the WEIGHT display returns to
zero.
