Extec I-C13 Impactor Скачать руководство пользователя страница 55

Страница: 55 / 292

Ver: IC13-EN-10567

Commissioning and Operation

Page 45

I-C13 Impactor

Prior to loading material into the machine, ensure that the machine is not vibrating or rocking

excessively. Stabilise with jacking legs if required, or relocate machine to more suitable ground.

4.9.2 Loading Material Into Machine

Feeder MUST be running PRIOR to feed material being placed upon it. DO NOT start

feeder if it is full of material.

Material which is larger than 80% of feeder discharge chute should not be presented to

the feeder. STOP MACHINE and remove any large pieces of material with the

appropriate equipment. DO NOT use excavators to force any material into feeder as any

damage occurred from this action will invalidate any Extec Screens & Crushers Ltd

warrantees.

Material should be fed carefully, (not dropped onto feeder) from about 300 mm above

feeder. Ensure that feeder is evenly loaded over its entire length - excluding grizzly. This

is to help with screening fines material and to maximise production.

It is recommended that an excavator is used to load material into hopper. DO NOT

OVER FILL HOPPER.

For maximum output and minimum wear, it is recommended that the crusher chamber is

fed consistently with the supply of material being steady and constant. STOP/ START

OPERATION OF THE FEEDER SHOULD BE AVOIDED.

1: Turn engine speed switch to position No.2.

2: Start systems as per above sequence.

Содержание I-C13 Impactor





































































































































































































































































































Результаты поиска

Содержание I-C13 Impactor

Отзывы:

Похожие инструкции для I-C13 Impactor

Бренды по названию

Популярные бренды

Extec I-C13 Impactor, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание I-C13 Impactor

Отзывы:

Похожие инструкции для I-C13 Impactor

Бренды по названию

Популярные бренды