Extec I-C13 Impactor, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 292

Page 10 Safety Instructions Ver: IC13-EN-10567
I-C13 Impactor
1.12.2 Blockage or Malfunction
In the event of material blockage, any malfunction or operational difficulty, stop the plant
immediately and lockout. Have any defects rectified immediately.
1.12.3 Unguarded Areas
• In-running nip points on moving machinery can cause serious injury or even death.
• Do not reach into unguarded machinery. Your arm could be pulled in and amputated.
• Switch off and lockout the plant before removing any safety devices or guarding.
• Limit access to the machine and its surrounds by erecting barrier guards to reduce the
risk of residual mechanical hazards, falling lifted loads and ejected materials.
1.13 Special Work
Such as Plant Maintenance and Repairs during Operation; Disposal of Parts and
Consumables
Observe the adjusting, maintenance and intervals set out in these operating instructions, except
where:
a. Warning, horn/ light/ gauge or indicator calls for immediate action.
b. Adverse conditions necessitate more frequent servicing.
c. Always read instructions supplied with replacement of parts and equipment. Ensure only
properly trained personnel undertake these tasks.
1.13.1 Isolation
When undertaking maintenance and repair work, the plant must be first made safe.
• Switch off the engine using the ignition key. Switch off at isolation point and remove the
ignition key.
• Implement lockout procedures.
• Attaching a warning sign(s) to the plant in appropriate positions.
1.13.2 Maintenance Site Conditions
Prior to starting any maintenance work ensure the machine is positioned on stable and level
ground and has been secured against inadvertent movement and buckling.
1.13.3 Replacement & Removal of Components
• Always observe handling instructions itemised in this manual, the Original Equipment
Manufacturer’s manuals or the spare parts suppliers' instructions.