Extec I-C13 Impactor Скачать руководство пользователя страница 19

Страница: 19 / 292

Ver: IC13-EN-10567

Safety Instructions

Page 9

I-C13 Impactor

and operate controls to relieve pressure. Stop the engine. Implement lockout procedures.

Allow the machinery to cool.

•

Keep all parts in good condition. Ensure that all parts are properly installed. Fix damage

immediately. Replace worn and broken parts. Remove any build up of grease, oil and

debris.

•

Disconnect battery ground cable before making adjustments on electrical systems or

welding on plant.

•

During maintenance only use the correct tool for the job.

•

Never make any modifications, additions or conversions which might affect safety without

the manufacturer’s approval.

•

In the event of safety relevant modifications or changes in the behaviour of the plant

during operation, stop the plant and lock out immediately and report the malfunction to

the competent authority/ person.

1.11 Personnel Qualification, Requirements and Responsibilities

Any work on and/ or with the plant must be executed by trained, reliable and authorised

personnel only. Statutory minimum age limits must be observed.

Work on electrical system and equipment of the plant must be carried out only by a

skilled electrician or by instructed persons under the supervision and guidance of a

skilled electrician and in accordance with electrical engineering rules and regulations.

Work on the hydraulic system must be carried out only by personnel with special

knowledge and experience of hydraulic equipment.

1.12 Safety Advice Regarding Specific Operational Phases

1.12.1 Standard Operation

•

Take the necessary precautions to ensure that the plant is used only when in a safe and

reliable state.

•

Operate the plant only for it's designed purpose and only if all guarding, protective and

safety orientated devices, emergency shut-off equipment, sound proofing elements and

exhausts, are in all place and fully functional.

•

Ensure that any local barriers erected to stop unauthorized entry to this equipment are in

place.

•

Before starting the engine ensure it is safe to do so.

Содержание I-C13 Impactor





































































































































































































































































































Результаты поиска

Содержание I-C13 Impactor

Отзывы:

Похожие инструкции для I-C13 Impactor

Бренды по названию

Популярные бренды

Extec I-C13 Impactor, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание I-C13 Impactor

Отзывы:

Похожие инструкции для I-C13 Impactor

Бренды по названию

Популярные бренды