Extec I-C13 Impactor, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 292

Page 12 Safety Instructions Ver: IC13-EN-10567
I-C13 Impactor
• The fastening of loads and instructing of crane operators should be entrusted to qualified
persons only.
• The marshal providing instructions must be within sight or sound of the operator with an
all round view of the operation.
• Always ensure that any safety fitment such as locking wedges, securing chains, bars or
struts are utilised as indicated in these operating instructions.
• Particularly make sure that any part of the plant raised for any reason is prevented from
falling by securing in a safe reliable manner.
• Never work under unsupported equipment.
• Never work alone.
1.13.6 Safety Considerations during Cleaning
• This equipment must be isolated prior to cleaning.
• Do not direct power washers near or into control boxes and devices.
• After cleaning, examine all fuel, lubricant, and hydraulic fluid lines for leaks, loose
connections, chafe marks and damage. Any defects found must be rectified without
delay.
1.13.7 Removal of Safety Devices and Guards
• All safety devices (control devices or guards) temporarily removed for set-up,
maintenance or repair purposes must be refitted and checked immediately upon
completion of the maintenance and repair work prior to operation.
• Never operate the machine with safety devices or guards removed or unsecured.
• Always report any defects regarding guards, safety devices or control devices.
1.13.8 Surrounding Structures
• This equipment must only be operated in a position away from buildings, permanent
structures or high ground to eliminate the risk of persons falling onto the equipment or its
surrounds.
• Any temporary structures erected around the machine must be removed prior to
operating this equipment.
1.13.9 Safety when Refuelling
• Only refuel with diesel from approved storage and supply equipment.
• Diesel fuel is flammable.
• Never remove the filler cap, or refuel with the engine running.