Express SERIES "H" Скачать руководство пользователя страница 25

Страница: 25 / 56

The help pages consist of buttons labeled with subjects.

When a button is pressed, information will be given about the

subject in question. A basic help page consists of text and/or

diagrams to help the user through basic problems. For

example, in the pictures above, the question “How Do I Install

My Control Humidistat?” is answered with a diagram and

corresponding text. Some pages consist of more buttons

to help guide a user through different processes. These

buttons can be used and referenced as needed.

“SETTINGS” MENU

The “Settings” menu has pages where all operational

values can be set. It is password protected by default, with

a default password of ‘1212’. The default password can be

changed or disabled under the “Change Password” page.

See “Settings Password” page for more details.

Max Output Adjust

The maximum steam output of the unit can be set on

this page. The maximum output value cannot exceed the

nominal output value of the unit and cannot be set below

20% of the nominal output. The nominal output of the unit is

listed on the nameplate and the “Electrical Data” help page.

This page consists of a counter where the user can monitor

the life, in hours, of the cylinder. When changing a cylinder,

press the ‘Reset’ button on this page to reset the timer.

The Cylinder Life Counter only counts the amount of actual

runtime of the cylinder (the time when the contactor is

pulled in). The counter value is saved even when the

humidifier is powered down. The national average cylinder life

is about 1150 hours, but this can vary greatly depending on

individual water conditions.

Fan Speed Adjust

This page consists of a slider bar that can change the speed

of the fans when the humidifier is connected to an optional

blower box. This slider bar will not affect the operation of the

humidifier if no blower box is attached. The bar can change

the speeds of the fans from 0 to 100% of the max fan speed.

Also displayed on this page is an estimate of the current fan

air output, in Cubic Feet per Minute (CFM). This adjustment

is particularly useful if the humidifier is of a smaller capacity,

and less noise from the fans is appreciated.

Cylinder Life Counter

Содержание SERIES "H"

























































Результаты поиска

Содержание SERIES "H"

Отзывы:

Бренды по названию

Популярные бренды

Express SERIES "H", Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание SERIES "H"

Отзывы:

Бренды по названию

Популярные бренды