www.exposurelights.com
8
LIGHT OPERATION
Multi Function Button
Located on the back of the light unit
is the function button (on top of body
for Spark light). This operates the
light unit and informs you of the mode
setting and the battery power status.
When the light is on and function button is pressed, the colour of the button
for the first two seconds informs you which mode has been selected.
Thereafter the colour of the button is your fuel gauge.
Green (High) – Amber (Medium) – Red (Low)
On the Strada model there are just two main modes
Green (High) – Red (Dipped)
Mode Function
• To turn on the light, double click the button; the light is now operating in
the brightest Max mode.
• To switch between the constant settings, press the button once.
• To activate the flashing mode, press and hold the button for 1 flash
(approx 1 second) and release. The flashing mode can be activated from
any of the constant modes. To return to the Max mode, press the button
once.
• To turn off the light, press and hold the button down. After 2 flashes
(approx 2 seconds) the light will turn off. The function button will rapid
flash red as the light shuts down.
Fuel Gauge Function
After two seconds the function button becomes the fuel gauge. The colour of
the button now indicates the approximate percentage of battery power left.
Button
Battery
Green
100% - 50%
Amber
50% - 25%
Red
25% - 5%
Red Flash
5% - Empty
Function
button
When the battery has only 5% charge remaining in whichever mode, the light
will automatically switch to the low setting. Modes available are restricted to
Ride and Low. The function button will flash red. Light output will slowly dim
over 3 hours and this is the extended burn time on reserve power.
Mode and Fuel Gauge functions will operate as normal when using a
remote switch. When using a Piggyback Battery the function button will only
flash green to indicate the light is charging.