Exposure MaXm-D Скачать руководство пользователя страница 13

www.exposurelights.com

13

Model and Accessory

High Setting

Med Setting

Low Setting

Joystick with RedEye

2hr 15min

5hr 30min

8hrs

Joystick with WhiteEye

1hr 30min

2hr 15min

2hr 40min

Diablo with RedEye 

55 mins

2hr 15min

5hr 20min

Race with RedEye

2hr 30min

7hrs

12hrs

Strada with RedEye

2hr 30min

7hrs

n/a

Toro with RedEye

2hr 45min

7hr 45min

14hrs

MaXxD with RedEye

2hr 45min

8hr 15min

16hrs

RedEye Micro

 is a very affordable plug-in rear light for the Joystick or 

Diablo. Activate the Power Port as described on page 12 and plug in the 
RedEye MicroThere is minimal drain on burn time for main light when using 
RedEye Micro. It is a very focused beam of light. As your head moves about 
it will catch the eye of the driver behind you. It is very effective but should be 
thought of as a supplement to your main rear light on the bike when cycling.

RedEye rear light accessories and White Eye accessory.

RedEye rear light:

  Encased in a tough CNC machined aluminium body 

and fully waterproof, the RedEye is possibly the brightest (80 Lumens) rear 
light on the market. It uses the same P4 LED as the Joystick but in red. Burn 
times will be reduced on your front light when running the RedEye. 

The RedEye is Velcro attached to helmets, seat posts or racks where you 
like and is provided with power cable to reach from post to handlebars. 
Excess cable is wound round the light body.

Be clearly seen from the rear both Day and Night. RedEye comes highly 
recommended to road cyclists even in daylight hours. It is so bright you can 
easily be seen with this accessory. 

RedEye Helmet rear light:

 A neat solution. Same as RedEye but with clip 

and short cable. Attach to body of Joystick or Diablo. Only used when light 
is on helmet or handheld.

WhiteEye front accessory: A 240 Lumen white P4 LED that clips to Joystick 
(or Diablo) in same way as RedEye Helmet accessory. Used to boost 
output.

WhiteEye fitted to Joystick

RedEye fitted to seat post

Содержание MaXm-D

















Отзывы: