manualshive.com logo in svg

Exposure MaXm-D, Руководство пользователя, Страница: 15 / 16

Поделиться
Скачать
Exposure MaXm-D Скачать руководство пользователя страница 15

www.exposurelights.com

15

MAINTENANCE 

Inspect and test your EXPOSURE light before every outing in the dark. 

Keep your EXPOSURE light clean, and the lenses free of dirt. The lenses are 
made of hi-tec plastic but can be scratched. Be careful when cleaning any 
mud or dirt from the lens. Never use a high pressure spray or hose on your 
EXPOSURE light. Do not use harsh abrasive or corrosive materials to clean 
your EXPOSURE light.

Follow all charging instructions. If the unit is being stored for long periods, 
please ensure the battery is periodically charged fully. We suggest once 
every month. The same applies to Piggyback batteries.

Thermal protection circuit

EXPOSURE LIGHTS are equipped with a thermal protection circuit. If the 
unit detects that it is getting too warm, it will dip to next lowest setting and 
then back to your chosen setting when temperature is correct. This is to 
protect the circuitry inside the unit, as well as the LED’s. It is not normal for 
this to ever happen at night when air temperature is low. It may happen if 
running the light unit on High inside a warm room. 

History

Exposure Lights are designed and manufactured to exacting standards in 
the UK by USE Ltd (Ultimate Sports Engineering). We have been riding and 
racing bikes in the dark since 1997. Unsatisfied with other lighting systems 
we recognised that the future of lighting was LED technology. In 2005 we 
launched the Exposure Lights brand and a revolution in lighting technology 
began. Our 2010 range is the most advanced, compact, lightweight and 
complete lighting range available to day. Thank you for investing in your 
Exposure Light. We wish you many happy years of use from it. Welcome to 
a better night time experience. Many of our dealers run night cycle rides. 
Why not join in or take part in one of the many night events we sponsor. 

We design them. We make them. We are here to help.

If you are experiencing any problems with your Exposure Light or 
accessories please contact us directly at:

Tel: Exposure/USE Ltd +44 (0)1798 344477   
or Service: +44 (0)1798 344471

e-mail: [email protected]   or   [email protected]

Alternatively contact your Exposure Dealer/Distributor - check web for 
details  www.exposurelights.com

Содержание MaXm-D

















Отзывы:

Нет отзывов