www.exposurelights.com
7
Handlebar clip - Diablo, Joystick, (Spark)
The QR Clip allows you to mount your Joystick, Diablo or Spark light to the
Quick Release.
Simply press the light into the QR clip with
the point of the clip towards the front of the
light
Now engage the clip and light into the QR.
A simple cable tie handlebar bracket is also
available as an accessory, as supplied with
the Spark light.
Helmet Mount – Diablo, Joystick, (Spark)
The highly acclaimed Joystick helmet bracket works as a
ball joint. Follow these instructions for set up and position of the light for
riding. The clamp is made up of three parts: Lower clamp disc, upper
clamp with ball joint socket and a nylon clamp bolt.
• Put the shorter plastic bolt through the lower clamp disc and align with
a selected vent on the inside of your helmet.
• Place the upper clamp through the top of the vent to meet the bolt.
• Tighten the bolt. Take care not to damage
your helmet.
Use the shorter bolt first and if not long enough
then go to the longer bolt. Do not use the long
bolt on thinner section helmets, as this will stop
the ball joint working or possibly pop it out.
• Clip the Joystick body into the top part of
the clamp
• The Joystick can be adjusted by rotating the
ball joint when holding the light and is easy to do when you are riding to
get the best position.
We suggest you attach a lanyard through the holes provided at the back
of the light unit and loop the lanyard through a vent in your helmet or
round the handlebar if using it there. This is for added security of your
light.
EXPOSURE LIGHTS/USE accepts no liability for any injuries or other
damages to person or equipment arising from the use of the clamps.