MENU
PERFORM
BLACKOUT
: dims out the fixture for PAN/TILT-movement.
DIMMER:
controls different dim curves to simulate a halogen bulb (
DIM4/DIM3/DIM2/DIM1/OFF
).
COLOR:
gives the user the opportunity to choose a colour calibration. In
UC
the Uniform-Color-Mode
can be selected, which activates the factory alignment of all fixtures of the MC family. In
RGBtoW
mode the values which have been set in the service menu will be used. When set to
OFF
no
calibration is used. The fixture runs with maximum intensity, then.
FULL POWER CCT:
sets the colour temperature at maximum output.
3200K/4200K/5600K/10000K
and
NORMAL
can be set.
DMX ERROR:
sets how the fixture responses if DMX-signal gets lost. Set
SAVE
to hold the last
received value or
BLACK
for blackout.
DMX RESET:
In the submenu
DMX
is set, whether the fixture can be reset via DMX (
YES
), or not
(
NO
). In the submenu
Display
is set, whether the fixture can be reset via display (
YES
), or not (
NO
).
DISPLAY ON:
defines how long the display illumination stays active after the last input. You can set
illumination time to
SHORT
or
LONG
.
DISPLAY LOCK:
locks (
ON
) or unlocks (
OFF
) display to prevent fixture from unauthorised access.
Enter password to unlock display.
E-34
OFF
BLACKOUT
ON
DIM4
DIM3
UC
COLOR
DIMMER
DIM2
DIM1
OFF
RGBtoW
OFF
FULL POWER CCT
3200K
4200K
5600K
10000K
DISPLAY
SAVE
BLACK
DMX
SHORT
LONG
DMX ERROR
DMX RESET
DISPLAY ON
DISPLAY LOCK
OFF
NORMAL
ON
DMX ERROR
DMX ERROR
YES/NO
DMX ERROR
YES/NO
