Setting Runmode
The
operating mode
is
set in menu
STAND ALONE
, submenu
RUN
. For operation on a
DMX-controller
DMX512
needs to be set. For operation via ArtNet
ARTNET
needs to be set. In mode
ARTNET2DMX
the choosen universe of the ArtNet input is sent to the XLR connectors. To run an
auto program choose
AUTO1
or
AUTO2
. In mode
CUSTOM
it‘s possible to run a self created
program. To run a test of all functions of the fixtures, choose
TEST
.
SLAVE
set the fixture into slave
mode.
MENU
MENU
Editing of user-defined programs
MENU
Info Menu
Step-by-step programming of the custom stand-alone programs with up to 50 different steps.
NOTE:
For less than 50 steps the
TIME
of the last step needs to be set to 0.
Example for time settings of a stand-alone programm with 3 steps:
Step 1
TIME
= 4
USE
= YES
Step 2
TIME
= 5
USE
= YES
Step 2
TIME
= 0
USE
= YES
SYSTEM ERROR:
In this menu the user can find the error messages of the different sensors. It is
differed in errors in light barriers (ENCODER), hall sensors (RESET) and other sensors (SENSOR)
E-36
DMX512
STAND ALONE
RUN
ARTNET
ARTNET2DMX
AUTO1
AUTO2
CUSTOM
TEST
SLAVE
STAND ALONE
STEP(01-50)
EDIT
PAN
TILT
RED
GREEN
BLUE
WHITE
DIMMER
STROBE
ZOOM
TIME
USE
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
YES
NO
INFO
SYSTEM ERROR
0X388Axxxxxxxx
ELW MC3
TEMPERATURE
VERSION
NETWORK PARA
RDM
UID
LABEL
V01