1. Remove top by releasing aluminium corner
profiles and profile closing caps (if present,
depending on model).
4. Remove finish on same side.
2. Remove closing guard over middle panels.
5. Release the 4 screws fixing the upper rail and
remove it.
3. Through the gap over the middle panels,
release anchoring screws between the upper
rail and the middle upright on the side of the
lock to replace.
6. Release and replace lock.
K. DOOR LOCK REPLACEMENT
(FOLLOW POINT B FIRST)
L. CONDENSER/COMPRESSOR/COOLING COIL REPLACEMENT
(FOLLOW POINTS A, B, C FIRST)
Recover refrigerating gas from the system according to current regulations.
Proceed with replacement of compressor/capacitor making sure to replace the filter
dryer as well.
Once the refrigerating circuit is restored, carry out a system test.
Proceed by emptying it with a vacuum pump, then recharge the system ensuring the
same gas is being used and in the amount reported on the plate fixed on the right cap
of the technical chamber or in the user manual that comes with the cabinet.
