C. EXTRACTION OF REFRIGERATING SYSTEM
(FOLLOW POINTS A, B FIRST)
1. Remove top by releasing aluminium corner
profiles and profile closing caps (if present,
depending on model).
2. Remove closing guard over middle panels.
3. Through the gap over the middle panels,
release anchoring screws between the upper
rail and the
FRONT
middle upright.
5. Remove middle upright by sliding it upwards
and the releasing it.
6. Operating in the right compartment, release
remaining screws on the middle panel and
remove it.
4. Release the 10 screws fixing the front middle
upright to the middle panels.
9. Remove fan guard by pulling it out and
disconnecting in from the cables.
7. Undo the bolt fixing the ground wire to the
panel and disconnect cable.
8. Operating in the left compartment, release
the screws fixing the fan guard.
10. Fix the evaporator with a strap or similar to
the upper rail.
11. Unscrew the probe guard from the middle
panel.
12. Remove the screws fixing the middle panel
that has remained attached to the middle
upright and remove it.
