10
2 Command
Command Format :
(Leading)(Address)(Command)[CHK](cr)
Response Format :
(Leading)(Address)(Data)[CHK](cr)
[CHK]
2-character checksum
(cr)
end-of-command character, character return(0x0D)
General Command Sets
Command
Response
Description
Section
%AANNTTCCFF !AA
Set Module Configuration
Sec.2.1
#AA
>(Data)
Read Analog Input
Sec.2.2
$AA0
!AA
Perform Span Calibration
Sec.2.3
$AA1
!AA
Perform Zero Calibration
Sec.2.4
$AA2
!AANNTTCCFF
Read Configuration
Sec.2.5
$AA3
!AAN
Read Channel Select
Sec.2.6
$AA3N
!AA
Set Channel Select
Sec.2.7
$AA8
!AAV
Read LED Configuration
Sec.2.8
$AA8V
!AA
Set LED Configuration
Sec.2.9
$AA9(Data)
!AA
Set LED Data
Sec.2.10
$AAF
!AA(Data)
Read Firmware Version
Sec.2.11
$AAM
!AA(Data)
Read Module Name
Sec.2.12
~AAO(Data)
!AA
Set Module Name
Sec.2.13
~AAEV
!AA
Enable/Disable Calibration
Sec.2.14
Excitation Voltage Command Sets
Command
Response
Description
Section
$AA6
!AA(Data)
Get Excitation Voltage Output
Value
Sec.2.15
$AA7(Data)
!AA
Excitation Voltage Output
Sec.2.16
$AAS
!AA
Start-Up Voltage Output
Configuration
Sec.2.17
$AAEVV
!AA
Excitation Voltage Trim
Calibration
Sec.2.18
$AAA
!AA
Excitation Voltage Zero
Calibration
Sec.2.19
$AAB
!AA
Excitation Voltage Span
Calibration
Sec.2.20
