12
2.1 %AANNTTCCFF
Description:
Set Module Configuration.
Syntax
:
%AANNTTCCFF[CHK](cr)
%
a delimiter character
AA
address of setting/response module(00 to FF)
NN
new address for setting/response module(00 to FF)
TT
represents the type code. Type code determines the
input range.
If TT=FF the type of all channels keep no change.
CC
new baudrate for setting module.
FF
new data format for setting module.
IF the configuration with new baudrate or new checksum setting,
before using this command, the rear slide switch must be in the
ON(INIT*) position. The new setting is saved in the EEPROM and will
be effective after the next power-on reset.
Response:
Valid Command:
!AA
Invalid Command:
?AA
Example:
Command: %0203050602
Receive: !02
Set module address
02
to
03
.
Input type code=
05
(-2.5~+2.5V) for all channels
Baudrate=
06
(9600)
Dataformat=
02
(2’s complement hexadecimal)
