28
MANUGENETOP5xx UniOP
Operating Instructions
VER 1.07
“
User mode
” is the simplest possible interface where a generic user can get access to the basic
settings of the panel:
Calibrate Touch
:
allows to calibrate the touch screen interface
Network
:
allows to change the options of the panel on-board
network card
Time
:
allows to change the panel RTC options, including
time zone and DST
Display settings
:
automatic backlight turnoff and brightness adjustment
BSP settings
:
allows to check the
BSP
(
B
oard
S
upport
P
ackage)
version (example 2.37), check the operating hours
timers for the unit and separately for the backlight,
enable/disable the buzzer, enable/disable the use of
the “low battery” front LED indicator
Plugin list:
allows to check the presence of optional plugin
modules installed.
“
System Mode
” is the complete interface of the System Settings tool where all the available options
are available; in addition to the options available in the “User Mode” we have the following important
options:
Format Flash
:
allows to format the internal panel fl ash disk
Resize Image Area
:
allows to resize the fl ash portion reserved to store the
splash screen image displayed by the unit at power
up; default settings are normally ok for all the units
Download Confi guration OS
:
allows to check current version and upgrade the
back-up operating system, see below in the next
chapter for additional details
Download Main OS
:
allows to check current version and upgrade the main
operating system, see below in the next chapter for
additional details
Download Splash Image
:
allows changing the splash screen image displayed
by the unit at power up; the image should be provide
in a specifi c format. We suggest to update Splash
Screen Image directly from Studio software which
supports this feature starting from V 1. 50
Download Bootloader
:
allows to check actual version of the system boot
loader and to upgrade it, see below for additional
details
Only for eTOP510, eTOP512, eTOP513 and eTOP515
Download Main FPGA
:
allows to check current version and upgrade the main
FPGA fi rmware, see below for additional details
Download Safe FPGA
:
allows to check current version and upgrade the
back-up (safe) copy of the FPGA Firmware, see
below for additional details
Download System Supervisor
:
allows to check current version and upgrade the
system supervisor fi rmware responsible for RTC
and power supply handling, see below for additional
details
Note:
the System Settings tool includes also other options, not described and not documented at this
moment
System Settings
