8
MANUGENETOP5xx UniOP
Operating Instructions
VER 1.07
3 T
echnical Specifi cations
Touch screen technology
Resistive
Back-up battery
3V 50mAh Lithium, rechargeable, not user-replaceable,
model VL2330.
Fuse
Automatic
Serial Port
RS-232, RS-485, RS-422 software confi gurable
User memory
Flash 128Mb for eTOP504, 506, 507
Flash 256Mb for eTOP510, 512, 513, 515
Recipe memory
Flash
Hardware clock
Clock/Calendar with back-up battery
Accuracy RTC (at 25°C)
<100ppm
Environmental conditions
Operating temperature (surrounding
0 ÷ +50°C
EN 60068-2-14
air temperature)
Storage temperature
-20 ÷ +70°C
EN 60068-2-14
Operating and storage humidity
5 ÷ 85 % RH not-condensing
EN 60068-2-30
Vibrations
5 ÷ 9 Hz, 7 mm
p-p
EN 60068-2-6
9 ÷ 150 Hz, 1 g
Shock
± 50 g, 11 ms, 3 pulses per axis
EN 60068-2-27
Protection class
IP66 front panel *
EN 60529
* The front face of the UniOP unit, installed in a solid panel, has been tested using conditions equivalent
to the standards shown in the “Environmental conditions”. Even though the level of resistance UniOP
unit is equivalent to these standards, oils that should have no effect on the UniOP can possibly harm
the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting
oil are allowed to adhere to the unit for long periods of time. If the front face protection sheet on the
UniOP becomes peeled off, these conditions can lead to the ingress of oil into the UniOP and separate
protection measures are suggested.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from
the panel, the original level of the protection cannot be guaranteed.
Standards and Approvals
