Exor eTOP506, Руководство по эксплуатации

Страница: 23 / 31

23
MANUGENETOP5xx - Version 2.00
© 2018 EXOR International S.p.A. - Subject to change without notice
Below you can find relation between modules and max number of modules that can be used into eTOP500
serie panels, based on their Interface Type:
Module Application Max Modules Interface Type Bus Extension
connector
PLCM01 CAN 1 for eTOP50x
2 for eTOP51x
CAN Y
PLCM01-NE CAN 1 for eTOP50x
2 for eTOP51x
CAN N
PLCM02 KNX 1 Serial N
PLCM03 Serial RS232 2 Serial Y
PLCM04 Serial RS485 2 Serial Y
PLCM05 CODESYS V2
License
1 Y
PLCM06 Profibus DP 1 SPI N
PLIO03 Multifunction I/O 1 SPI N
PLIO06 Compact I/O 2 SPI N
Max modules refers to max number of modules can be plugged into the HMI (all slots),
If you are planning to use PLCM03 and PLCM04 (additional serial ports) you will obtain following “COM -
Slot#” association:
• a module plugged in Slot#1 or into Slot#2 will be COM2,
• a module plugged in Slot#3 or into Slot#4 will be COM3.
If you are planning to use two PLCM01 (CAN interface) you will obtain following Slot# association:
• a module plugged in Slot#1 or into Slot#2 will be the CanPort 0,
• a module plugged in Slot#3 or into Slot#4 will be the CanPort 1.
5 Connections