26
MANUGENETOP5xx - Version 2.00
© 2018 EXOR International S.p.A. - Subject to change without notice
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
eTOP Series 500 HMI products must be programmed with the software JMobile Studio. JMobile Studio
is a software tool that must be properly installed on a computer running Microsoft Windows.
There are two options to transfer a JMobile application project to a HMI device:
Ethernet
Connect the HMI device to the computer with an Ethernet network connection. From
JMobile Studio choose the command Run/Download to target. You may have to ensu
re that the proper firewall policy has been configured in the computer to allow JMobile
Studio to access the network.
USB or SD
Create an Update Package using JMobile Studio and copy it to a USB Flash drive or
to an SD memory card.
8 Cleaning faceplates
9 Getting Started
