Exor eSMART Series, Руководство по эксплуатации

Страница: 23 / 25

23
MANUGENESMARTxx - Version 2.01
© 2018 EXOR International S.p.A. - Subject to change without notice
9 System Settings
eSMART HMI products have a system settings interface to allow configuration of system options.
The user interface of System Settings is based on HTML pages accessible locally on HMI or in remote
using a Web browser Chrome v44 or higher on port 443 (https://IP/machine_config). Default username is
“admin”, default password is “admin”. Use navigation menu on the left side of the screen to browse through
the available options.
The active item of menu is highlighted on the left side. The right side shows related information and
settings. Based on the size of the HMI screen, both menu and content of selected item may be shown on
screen or not.
System Settings has two modes of operation:
User Mode JMobile runtime is running or the HMI device is in “factory default” status.
System Mode JMobile runtime is not running or the HMI device has a software failure.
System Mode includes all options available in User Mode and offers in additions
commands dedicated to system upgrade and recovery not availables when running in
User Mode.
Activation of System Settings in User Mode :
JMobile runtime not running Press “System Setting” button on the HMI screen
JMobile runtime running Recall context menu and select “System Settings”. To recall
the context menu click and hold any unused area of the
touchscreen for a few seconds. Default hold time is 2 seconds.