background image

10

MANUGENESMARTxx - Version 2.01

© 2018 EXOR International S.p.A. -  Subject to change without notice

3 Technical Specifications

Immunity to conducted disturbances

inducted by radiofrequency field

  

0.15 ÷ 80 MHz, 10V  

 

 

EN 61000-4-6 

Voltage dips, short interruptions and

voltage variations immunity test

 

Port: AC mains; Level:

 

100%  duration: 1 cycle and 250 cycles (50Hz);  

 

          

40%  duration: 10 cycles (50Hz);

 

70% duration: 25 cycles (50Hz); 

 

Phase: 0°-180°

Test executed on the 230Vac side of the EXOR International S.p.A. Power Supply 

EN 61000-4-11

Durability information

Backlight service life 

20000 Hrs. or more

 

(LED type) 

(Time of continuos operation until the brightness of the

 

backlight reaches 50% of the rated value when the    

 

sorrounding air temperature is 25°C) - see Note 1

Front foil 

10 years if the surrounding air temperature is 25°C

(without direct exposure  to

 

sunlight or UV)

 

UV Resistance 

Indoor applications: After 300 hours cycled humidity in  

 

QUV accelerated weathering, some yellowing and    

 

brittleness may be present.

Solvent resistance

Contact for 1/2 hour at 21°C, No visible effect: Acetone, Butyl Cellosolve, Cyclohexanone, Ethyl Acetate, 

Hexane, Isopropyl Alcohol, MEK, Methylene Chloride, Toluene, Xylene

Contact for 24 hours at 49°C, No visible effect: Coffee, Ketchup, Lemon Juice, Mustard (slight yellow 

stain), Tea, Tomato juice.

Touchscreen reliability

 

> 1 milion operations

Note 1: Extended use in environments where the surrounding air temperature is 40°C or higher may 

degrade backlight quality/reliability/durability.

Electromagnetic Compatibility (EMC) 

Radiated disturbance test

  

Class A  

 

 

 

 

EN 55011

Electrostatic discharge immunity test  

8 kV (air electrostatic discharge)    

EN 61000-4-2

 

4 kV (contact electrostatic discharge)

Radiated, radio-frequency,

  

80 MHz ÷ 1 GHz, 10V/m    

 

EN 61000-4-3

electromagnetic field immunity test

 

1,4 GHz ÷ 2 GHz, 3 V/m

 

2 GHz ÷ 2.7 GHz, 1 V/m

Burst immunity test

 

± 2 KV dc power port 

 

 

EN 61000-4-4

 

± 1 KV signal line 

  

Surge immunity test

 

± 0,5 KV dc power port (line to earth) 

EN 61000-4-5

 

± 0,5 KV dc power port (line to line)

 

± 1 KV signal line (line to earth)

 

Содержание eSMART Series


























Отзывы: