Exodraft EFC21, Руководство пользователя

Страница: 7 / 24

UK | 7
3112017_EFC21_UK
Warning
To minimise the risk of fire, electric shock, personal injury
and/or damage to the product please observe the following:
• Please always read the manual and only use the product in accordance with the
manufacturer’s instructions. If in doubt, contact one of the Exodraft specialized dealers.
• All installations must be carried out by properly qualifi ed personnel in accordance with
national legislation and regulations.
• This product must be earthed. Get assistance from an qualifi ed electrician when in doubt.
• This product must always be disconnected under the installation.
• Prior to servicing the product, disconnect the power and ensure that it cannot accidentally
be reconnected.
• Exodraft always recommends the use of a smoke alarm when a solid fuel open fire is
installed.
• If the Exodraft fan system has been designed for solid fuel/multi fuel installations, please
ensure that the design meets the requirements of BS EN15287-1. If this cannot be achie-
ved, a smoke alarm must be installed in the same room as the heat appliance.
UK
Your energy. Optimized.
Product information
EFC21 is used to control gas fireplaces that have Exodraft chimney fans installed.
The control system functions as a safety monitoring system and will switch off the gas fireplace if there is
insufficient chimney draught.
The system has been developed in accordance with standards BS 5440-1: 2008,
BS 6644 :2005+A1:2008, Appliances Burning Gaseous Fuels Directive 2016/426/EC and
EN298 (2012).
Incorrect use may result in problems with soot, chimney fires, etc. which might damage the product.
Please check out this site for advice about the product:
www.exodraft.com
Scope of supply
• EFC21
• Temperature sensor
• Installation manual and user instructions
Accessories
The table below shows the accessories and spare parts available for the RHG-models.
Accessories*
Temperature sensor
Isolation switch
*This manual does not describe the specific use of accessories. We refer to the separate manuals for such components.
For more details contact your Exodraft dealer.