Exmark Turf Ranger FMD604 Скачать руководство пользователя

Страница: 26 / 48

- 21 -

4.4 TRANSPORTING

WARNING

POTENTIAL HAZARD

♦

Loading the mower onto a trailer without strong

enough or properly supported ramps could be
dangerous.

WHAT CAN HAPPEN

♦

The ramps could collapse causing the unit to fall,

which could cause injury.

HOW TO AVOID THE HAZARD

♦

Use proper ramps that are secured to the truck or

trailer.

♦

Keep feet and legs out from under the unit when

loading and unloading.

♦

If necessary, use assistance when loading.

Be sure the fuel shut-off valve is closed.

Use a heavy duty trailer to transport the machine. Engage neutral lock latches
and park brake, then block wheels.

Securely fasten the machine to the trailer with straps, chains, cables, or ropes.

Do not rely solely on the parking brake to hold the machine on the trailer.

Be sure that the trailer has all necessary lighting and marking as required by law
and use a safety chain.

5. MAINTENANCE & ADJUSTMENTS

WARNING

POTENTIAL HAZARD

♦

While maintenance or adjustments are being made,

someone could start the engine.

WHAT CAN HAPPEN

♦

Accidental starting of the engine could seriously injure

you or other bystanders.

HOW TO AVOID THE HAZARD

♦

Remove the key from the ignition switch and pull the

wire(s) off the spark plug(s) before you do any
maintenance. Also push the wire(s) aside so it does
not accidentally contact the spark plug(s).

WARNING

POTENTIAL HAZARD

♦

The engine can become very hot.

WHAT CAN HAPPEN

♦

Touching a hot engine can cause severe burns.

HOW TO AVOID THE HAZARD

♦

Allow the engine to cool completely before service or

making repairs around the engine area.

Содержание Turf Ranger FMD604

















































Результаты поиска

Содержание Turf Ranger FMD604

Отзывы:

Похожие инструкции для Turf Ranger FMD604

Бренды по названию

Популярные бренды

Exmark Turf Ranger FMD604, Руководство оператора

Результаты поиска

Содержание Turf Ranger FMD604

Отзывы:

Похожие инструкции для Turf Ranger FMD604

Бренды по названию

Популярные бренды