Exmark TT4819KAC Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 48

background image

ii

WARNING

POTENTIAL HAZARD

♦

This product is a piece of power equipment.

WHAT CAN HAPPEN

♦

Failure to follow safe operating practices can result in serious

operator injury or even death.

HOW TO AVOID THE HAZARD

♦

Keep all shields, guards and safety devices (especially the grass

discharge system) in place and in proper working condition.

♦

Stop engine and wait for all moving parts to stop. Remove spark

plug wire(s) or remove key before adjusting, servicing, or
performing maintenance.

♦

If mower deck becomes clogged, stop engine and wait for all

moving parts to stop. Remove spark plug wire(s) or remove key
before cleaning blockage.

♦

Keep hands, feet, and clothing away from power driven parts.

♦

Keep off mower unless seat platform is provided.

♦

Keep others off mower.

WARNING

POTENTIAL HAZARD

♦

Gasoline is harmful or fatal if swallowed. Long-term exposure to

vapors has caused cancer in laboratory animals.

WHAT CAN HAPPEN

♦

Failure to use caution may cause serious injury or illness.

HOW TO AVOID THE HAZARD

♦

Avoid prolonged breathing of vapors.

♦

Keep face away from nozzle and gas tank/container opening.

♦

Keep away from eyes and skin.

♦

Never siphon by mouth.

IMPORTANT

When the mower is used or operated on any California forest, brush or grass covered land, a working
spark arrester must be attached to the muffler. If not, the operator is violating state law, Section 4442
Public Resource Code. To acquire a spark arrester for your unit, see your Engine Service Dealer.

This spark ignition system complies with Canadian ICES-002
Ce système d’allumage par ètincelle de vèhicule est conforme à la norme NMB-002 du Canada

The enclosed Engine Owner’s Manual is supplied for information regarding The U.S.
Environmental Protection Agency (EPA) and the California Emission Control Regulation of
emission systems, maintenance and warranty.

Keep this engine Owner’s Manual with your unit. Should this engine Owner’s Manual become
damaged or illegible, replace immediately. Replacements may be ordered through the engine
manufacturer.

Exmark reserves the right to make changes or add improvements to its products at any time without
incurring any obligation to make such changes to products manufactured previously. Exmark, or its
distributors and dealers, accept no responsibility for variations which may be evident in the actual
specifications of its products and the statements and descriptions contained in this publication.

«
1
2
3
4
...
»

Содержание TT4819KAC

















































Отзывы:

Нет отзывов

Похожие инструкции для TT4819KAC

Бренд: Poulan Pro Страницы: 48

Бренд: Toro Страницы: 60

Бренд: Yard-Man Страницы: 16

Бренд: Ransomes Страницы: 116

Бренд: Yard-Man Страницы: 20

Бренд: Major Страницы: 50

Бренд: Bad Boy Страницы: 48

309006 190A Series

Бренд: Murray Страницы: 40

Бренд: Webb Страницы: 12

Poulan Pro 961140016

Бренд: Poulan Pro Страницы: 2

GRO20V20WIFI-2A

Бренд: GARDEO PRO Страницы: 158

Super Recycler 20792

Бренд: Toro Страницы: 120

FrontRunner Diesel

Бренд: Exmark Страницы: 44

Бренд: Exmark Страницы: 52

Laser Z XPLZ27DD724

Бренд: Exmark Страницы: 60

Бренд: Giant-Vac Страницы: 36

Бренд: LOFTNESS Страницы: 50

Бренд: Kubota Страницы: 113

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды