Exibel 38-8834-1, Инструкция по эксплуатации

Страница: 4 / 24

4
En
gl
is
h
1
2
4
5
6
7
3
Buttons and functions
1. Adjustable headband
2. [
▲
] Press repeatedly to
raise the volume. Hold in to
select the next track, reject
an incoming call.
3. [
O
] Press to play or pause
a track or answer/end
a telephone call. Hold in to
switch the headphones off/on
and for pairing.
4. [
▼
] Press repeatedly to lower
the volume. Hold in to select
the previous track, reject
an incoming call.
5. LED indicator
6. Micro-USB port
7. Microphone
Instructions for use
Charging
Charge the battery completely before using the headphones for the first time.
A completely discharged battery will take approximately 2.5 hours to charge.
1. Connect the included charger
lead to the Micro-USB port
on the headphones and to
a computer or other USB
charger.
2. The LED indicator (5) will
shine red while the battery is
charging and go out when
the battery is fully charged.
Connecting a Bluetooth device (pairing)
Before the headphones can be used they must be paired with a Bluetooth device.
Each Bluetooth device only needs to be paired with the headphones once.
1. Make sure that the headphones are turned off by checking that the LED indicator is not flashing.
2. Hold in [
O
] for approx. 4 seconds until the LED indicator flashes red/blue.
3. Activate Bluetooth mode on the external device that you want to connect the headphones to.
Search for the headphones on your Bluetooth device (refer to the manual for your device).
4. The headphones will appear on your device as Hyperite , select connect.
5. When contact has been established the LED indicator will indicate a successful connection by
flashing blue every 5 seconds.