SGW1-IA3-MMP – Modbus Multiplexer
Exemys
www.exemys.com
SGW1-IA3-MMP User’s Manual Rev. 1
18
5
Monitoring
The SGW1-IA3-MMP allows you to monitor communications on all four ports from the USB
console. With the
TRACESON
command the monitoring messages are enabled. With the
complementary command
TRACESFULL
you can have more detailed information.
Activating the
TRACESON
command, we will see the incoming and outgoing traffic
corresponding to the port activated and the ID of the target device. Then when adding the
TRACESFULL
command, the content of the traffic expressed in hexadecimal is added to
the above information.
In the following example, the
TRACESON
and
TRACESFULL
commands of ports A and C
are activated:
Activation of the
TRACESON
and
TRACESFULL
commands cause process delays in the device,
due to the density of information to be presented; So activating these commands slows
communication between the devices.
