23
EXCENTR 55-35
4. INTENDED USE
The Excentr 55-35 floor preparation machine is developed for:
• Cleaning
• Stripping
• Polishing
• Sanding
• Leveling
• Grinding
small and medium-size hard and watertight floor surfaces, with the use of the exchangeable pads
and/or accessories that are applicable for a task. The duty cycle is 100% under normal use and in
case of good workmanship. Manufactured in accordance with IP54 for use with (scrub) water.
WARNING!
Any use other than that mentioned above will relieve EXCENTR BV of all its
responsibilities!
Use for other purposes has not been examined (yet) by Excentr. When considering other
applications, please contact Excentr IN ADVANCE to discuss whether the machine is actually
suitable.
During operation the person stands BEHIND the machine with both hands (loosely) on the
T-handlebar.
WARNING!
The machine does NOT comply with the ATEX directive and this version may NOT be
used in any such environment!
5. TECHNICAL DATA
5.1 Sizes and weights
Height:
1,25 m
Width:
0,70 m
Depth:
0,55 m
Weight:
ca 45 kg, basis machine (geen ballast)
Ballast:
standard 1 set (=12kg)max 6 sets (=72kg)
Voltage:
220V-240VAC @ 50Hz
Current:
max 8A (input)
Power: 1200W
Insulation:
Rim earthing
Insulation class: IP54 (dust-tight /splash-proof)
Inclination:
Max 2%
EN
