Excell AWH3, Руководство пользователя

Страница: 21 / 28

EXCELL PRECISION CO., LTD.
0201813X ZSME300000366 20
4. Repeat above Steps 2-3 to make 10 or more measurements, then compare deviations
among these 10 measurements.

How to exit hold mode:
Suppose Weight Hold Range is set as 1.000 kg, and the weight held after stable is 8.543 kg
(now the weight is held with buzzer already beeped, weight value will not change), when
weight change (increment or decrement) equals or exceeds Weight Hold Range (i.e. 8.543kg
+ 1.000kg or 8.543kg
– 1.000kg), scale will automatically exit hold mode, then scale will
recalculate holding weight (i.e. changing weight is displayed in real time until weight becomes
stable, and scale enters hold mode). This whole hold mode entry and exit process will repeat
continuously.
3-6 F11 ID Code Setting
(must be used with r n P 1, r n P 2, r n P 8 of F5)
Press key or key to select F11
RS232 DATA FORMAT
Stable transmission (
r n P 1
), Continuous (
r n P 2
), Press key to transmit (
r n P 8
)
1. e.g. Machine ID code is 10.
The gross weight (+0.876 kg) shows as below, after stable: (no tare or pre-tare mode)
1 0 S T , G S , + 0 0 0 . 8 7 6 k g
<CR> <LF>
ID HEAD1 , HEAD2 , DATA UNIT
2. e.g. Machine ID code is 00. (Not using Machine ID function.)
The net weight (-1.568 lb) shows as below without weight stability: (under tare or pre-tare mode)
U S , N T , - 0 0 1 . 5 6 8 l b
<CR> <LF>
HEAD1 , HEAD2, DATA UNIT
Machine ID code setting:
Use and to set 01 ~ 99. Default setting: 00
(1) “00”: RS-232 does not transmit Machine ID.
(2) “01~99”: RS-232 transmits Machine ID.
Press key
Press key