Excell AWH3, Руководство пользователя

Страница: 13 / 28

EXCELL PRECISION CO., LTD.
0201813X ZSME300000366 12
3-1 F4 Check Weighing Configurations

If hold mode ( ) is set, accessing to F4 is denied.
Press or key to select F4
Preset
“LO value”
(LO value

10d)
Press and
key to set “ LO value”
E.g. LO value = 2 kg
Preset
“HI value”
(HI value

LO value)
Press and
key to set “HI value”
E.g. LO value = 2.5 kg
Preset
“Beeper value”
Press and
key to set “HI value”
E.g. Beeper value = 22
Press key for 5 times
to clear HI, OK, LO values
.
kg
.
kg
Press key
.
kg
key = Increase the flash value by one (from 0
to 9)
key = Confirm key
.
kg
 
A B
A

0 = After stable, the beeper beeps and the
indications are on
1 = After stable, the beeper beeps; whether
stable or not, the indications are on.
2 = whether stable or not, the beeper beeps
and the indications are on.
3 = open warning device: when the weight is
higher than HI value and the weight is
stable, LCD is on and Relay Card open.
B

0 = No beep
1 = OK (when the weight is between Low limit
& High limit.), the beeper beeps.
2 = When the weight is under or equal to Low
limit (must be over 10d) & over or equal
to High limit, the beeper beeps.

LCD indication description:
     



 


10d Low limit value High limit value
.
kg
kg
kg
L

1

Press key
Press key
Press key
Press key
Press key
Relay low output setting:
Use and
to set 0~1; Default setting: 0. L 1

relay low output,
L 0

relay low no output.