User Guide
- 17
–
7 Inserting and Removing the Light Guide
7.1.1
Ensure that the protective end caps are removed from both the input and
output ends of the light guide prior to installation.
7.1.2
Insert the light guide into the light guide port located on the front panel of the
unit. Push the light guide in until it seats with a second positive "click".
7.1.3
During installation or removal, grasp the light guide on the strain-relief nearest
the input end of the light guide.
7.1.4
To remove the light guide, firmly grip the strain relief near the light guide
retainer and pull out firmly.
7.1.5
Refer to section 21.5 for Light Guide Cleaning Instructions.
Note: 3mm single leg liquid light guides are not compatible with the
S2000 PRO/ELITE!
Tip: When the light guide is fully inserted, the light ring will illuminate
Green, Yellow or Magenta. If the light guide is not fully inserted the
light ring will illuminate red.
Note: the shutter will not open if the light guide is not fully inserted.
Note: Never grip the light guide during installation or removal in a place
other than the strain relief portion of the light guide.
Note: The S2000 PRO/ELITE is designed for use with
Excelitas Canada
Light
Guides.
Excelitas Canada
can not guarantee the performance of the
S2000 PRO/ELITE if using light guides other than those supplied by
Excelitas Canada
.