Page | 11
INSTALLATION
1. Open the box and carefully take the heater out.
2. Take out the packing paper sheet from the end of heater
3. Take out one pair of mounting Brackets. These adjustable brackets allow the
product to be mounted to a wall and come with preset angle options of parallel,
15°, 30°, 45° and height 170mm.
4. For the correct installation process, use the diagram above for requirements.
Select the heater location on the wall by locating the stud or structural beams
to ensure secure fastening of the heater, whilst observing the minimum
clearances from the floor and other objects.
