background image

 

 

 

 

 

 

 

 

      

 

 

 

 

Page | 5 

 

 
 

  This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety. 

  Children should be supervised to ensure that they do not play with the 

appliance. 

  The appliance is only intended for the purpose described in user manual. 

  Do not use appliance or any part of the appliance out of the intended use to 

avoid risk. 

  The use of attachments which are not recommended or sold by the appliance 

manufacturer may cause a risk of injury to persons. 

 

CAUTION

 

 some parts of this product can become very hot and cause 

burns. Particular attention has to be given where children and vulnerable 
people are present. 

 

WARNING

: This heater is not equipped with a device to control the room 

temperature. This heater is to be used in open, alfresco environment or large 
areas with high ceilings. The heater must not be within reach from the floor, 
as severe burns may occur due to high surface temperatures. Do not use this 
heater in small rooms or where the room or area is occupied by persons not 
capable of leaving the room on their own, persons who are unable to operate 
the heater safely and with the guidelines of the use manual, unless constant 
supervision is provided. 

 

WARNING:

 THE HEATER MUST NOT BE USED IF THE GLASS PANELS 

ARE DAMAGED. 

  When the appliance is not in use and before cleaning, unplug the appliance 

from the outlet. 

  To protect against the risk of electrical shock, do not immerse the unit, cord or 

plug in water or other liquid. 

  The appliance is only intended for the purpose described in user manual. Do 

not use appliance or any part of the appliance out of the intended use to 
avoid risk. 

  The use of attachments which are not recommended or sold by the appliance 

manufacturer may cause a risk of injury. 

 

 

 

 

Содержание EOHA22GR
















Отзывы: