Excel 2-Bag Catcher 42", Руководство оператора

Страница: 12 / 40

REV A 3-4 119649
12. Raise the seat platform.
13. Unbolt the mower’s fenders from the mower frame.
There are four bolts per fender that will need to be
removed. Figure 3-6
This allows the fenders to be moved to provide access to
the mower frame. It is not necessary to remove the
fenders from the mower.
NOTE: It will be necessary to unscrew the fuel cap from
the fuel tank fill neck and slide the plastic cap over the fill
neck opening. The plastic cap will slide over the fuel
cap’s tether line. This will allow the left fender to move
enough to allow access to the hole in the mower frame.
Figure 3-7
NOTE: It is not necessary to remove the control panel
from the right fender. There should be sufficient access to
the frame with the fender loose.
Figure 3-4
Catcher frame
Cap Screw .375-16 x .75
Hair pin
Tie rod
Cap Screw .375-16 x .75
Nut .375-16 HXFLK
Nut .375-16
HXFLK
Support
gusset RH
Support
gusset LH
Fender
support
bracket
Refer to
View A
View A
Keyhole
Mower
frame
Support
gusset LH
Nut .375-16 NYLK
Figure 3-5
Tall engine
guard
WARNING
When performing this step heed the warnings listed
below:
• Do not smoke while the fuel cap is not properly
secured to the fuel tank fill neck. Extinguish all cig-
arettes, cigars, pipes and other sources of ignition.
• Use extreme care when handling gasoline which is
extremely flammable and vapors are explosive. A
fire or explosion from fuel can burn you and others
and can damage property.
• Do not remove the fuel cap with engine running
or while engine is hot.
Clean up any fuel spills.
• If fuel is spilled on clothing, change clothing imme-
diately.