background image

triggered the system. The Digital Status Indicator and Visual Deterrent LED will continue
flashing this Zone Violation Code until the ignition switch is turned “on”, which clears the
system's Zone Violation Code memory circuit.  Please see Pages 25-29 for the violation codes.

While the security system is in the armed state, pressing and releasing the large transmitter

button once will instantly disarm the system and unlock the door or doors.  Disarming is
confirmed by the siren chirping twice, and the parking and interior lights turning on for 30
seconds. However, the lights will turn off instantly if  the ignition switch is turned "on". If
the system was triggered while you are away, the disarm confirmation will change to 4 siren
chirps, 4 light flashes, and then the lights will stay on for 30 seconds, to illuminate the way
to your vehicle. The security system will have this response upon disarming until the ignition
switch is turned "on", which clears the unit's memory.  Anytime the security system triggers,
the Visual Deterrent LED and the Digital Status Indicator will indicate which zone triggered
the system; these are explained on Pages 25-29.

Your Excalibur Gold vehicle security system offers a very high level of personal safety

and convenience with the advanced features utilized upon disarming. The ability to know
instantly if your system was triggered while you were away, and the exterior and interior light
illumination allows you a lighted approach to your vehicle with the ability to examine the
interior before entering. If you wish, you can program the system to turn on the exterior and
interior lights for five seconds instead of thirty seconds upon disarming.

Disarming The System Using The Transmitter

Page - 17

Page - 18

Easy Valet

TM 

&  Personal Coded Override

Valet Mode is a condition, or state, in which the security system may be placed to prevent

certain functions from occurring, especially any automatic functions such as Last Door
Arming.  An Override is an alternative method of disarming an armed and activated system.
Therefore, there are two separate and distinct methods to obtain these functions: first is Easy
Valet

TM

 

 

Mode, whereby a disarmed system may be placed into Valet Mode without the

ignition key, and the second is Personal Coded Override Mode, which will disarm an armed
or  activated  
system and requires the use of the ignition key.

The Valet Switch is on the Information and Programming Module.

Easy Valet

TM 

Mode: This unique feature can be utilized anytime the security system is in

the disarmed condition. If your Excalibur Gold system is programmed to perform any automatic
features, such as Last Door Arming, you will find Easy Valet Mode useful when stopping for
fuel, having your vehicle serviced, having it valet parked, etc. Easy Valet Mode is unique
because other security systems require the ignition switch to be "on" to enter Valet Mode,
but with this system, the ignition can be either "on" or "off", so the key is not required.

Whenever the security system is disarmed, simply depress the Valet Switch for two

seconds to achieve the Easy Valet Mode. The system will confirm it is in the Easy Valet Mode
with two siren chirps.  The Digital Status Indicator will show "    " for 30 seconds and
the Visual Deterrent LED will illuminate steady.  To remind you that the system is in Easy
Valet Mode, every time the ignition switch is turned "off" the siren will chirp once.  The system
will hold memory of the Easy Valet Mode condition while the ignition is "on" or
"off", or even  if  power is removed from the system.

While in the Easy Valet Mode, the transmitters can still operate the Panic Feature, the

power doorlock operation, or optional trunk release.  Additionally, the doors will lock when
the ignition is turned "on" and unlock when turned "off"', if this programmable feature is
utilized.  To exit the Easy Valet Mode, simply momentarily press the Valet Switch. The security
system will instantly revert to the disarmed condition. To confirm that Valet Mode
has been exited, the Information and Programming Module and Digital Status Indicator will
turn off. Remember, Easy Valet Mode only operates when the security system is in a disarmed
state - an armed condition requires using the Personal Coded Override, which may be custom
programmed to be operable only by yourself.

Personal Coded Override - How To Disarm The System Without Using The Transmitter:

In the event the transmitter is lost, damaged, or otherwise inoperable, the Valet Switch and
your ignition key may be used to disarm the system.  This is Personal Coded Override, and
you may custom program its operation for convenience, or, a higher level of security.  As set
at the factory, Personal Coded Override operates in the following fashion:

1)

If the security system is armed, and the transmitter not available or operable, have
the ignition key ready and enter the vehicle - be prepared for the system to trigger
when the door is opened.

2)

Turn the ignition switch "on", and within 5 seconds press and release the Valet
Switch once.
The system will instantly disarm.

Page - 19

Personal Coded Override can offer a higher level of security if desired because, in addition

to the ignition key, you may configure a second "stage" to the procedure, and even program
a preset number of Valet Switch presses for each stage.  Please see Pages 34-35 for further
programming and operational details of this Feature.

Page - 20

Remote Panic

Should you feel threatened or the need to attract attention at any time, you can activate

your Excalibur Gold's Remote Panic feature by depressing the large transmitter button for 2
seconds.  Your system will respond by sounding the siren, locking the doors and flashing
the exterior lights for 60 seconds.  Remote Panic may operated regardless of the system's armed
or disarmed status, while the ignition switch is "on", and while the system is in Valet Mode.
To disengage Remote Panic, simply press and release the large transmitter button again.  If
you should wish to enter your vehicle after engaging Remote Panic, press and release the large
transmitter to disengage Remote Panic; the doors will also unlock, allowing easier entry.

Remote Trunk Release & 3rd Channel Output

Remote Trunk Release:  If your vehicle is equipped with electric trunk release, your

authorized Excalibur Gold dealer can configure your system to accomplish trunk release from
your transmitter. To operate this option when equipped, simply press and hold the small
center transmitter button for 2 seconds. Your vehicle will respond by releasing the trunk lid,
chirping the siren twice, disarming the system and turning on your exterior and interior lights
for 30 seconds.   The trunk release output will not operate with the ignition

Содержание Excalibur Gold eg-1800atv














Отзывы: