Page - 49
29) Automatic Remote Engine Start: Default OFF. This Feature, described on Page
24, will automatically start the engine, but it must be activated for each use. Turning
this feature on is simply making it available for use.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
31-32. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp to indicate that this Feature is ON. Pressing the
small center button will turn this Feature OFF, with the system's response being two
siren chirps. Page 24 describes how to activate this feature for use.
Important! If Automatic Transmitter Verification
TM
(siren chirping or horn honking for
2 seconds upon the ignition being turned "on") should ever be activated, you should
immediately recode your existing, authorized transmitters.
Up to 4 different transmitters may be programmed into the security system's memory. When
a new transmitter code is programmed into the system, all previous codes will be deleted. If
a third or fourth transmitter is desired, all of the transmitters must be programmed into system's
memory. To program transmitters to operate your system, follow this process:
1)Turn "on" the ignition switch; within 5 seconds of turning "on" the ignition switch, press
the Valet Switch 5 times. The system will respond with a long siren chirp.
Note: If no further coding action is taken, or if the ignition is turned "off", the learning
Programming Transmitters
process will automatically terminate, which will be indicated by two siren chirps.
2a) The Personal Coded Override must be entered before 15 seconds expires. Press the Valet
Switch the correct number of times - the factory-set default is one press for stage #1 and
no press for stage #2. If the system is configured with the default setting, it will respond
by sounding the siren for a short period, then two chirps. In this case proceed to Step 3.
2b) If the system has had the Personal Coded Override custom-programmed, once stage #1
been properly entered (which can be up to nine Valet Switch presses) the system will
acknowledge the entry by sounding the siren for a short period, then one chirp. You now
have 8.5 seconds to initiate stage #2 of entering the Override Code. Momentarily press the
Valet Switch equal to the Override Code number programmed for stage #2. The system will
acknowledge the entry by sounding the siren for a short burst and two chirps.
3)To learn the first transmitter code, press the large transmitter button, (which will arm/disarm/
panic the system), until you hear one long and one short siren chirp to confirm that the code
was learned. The two small button's functions will automatically be learned at the same time.
When the first transmitter code is learned, all other prior codes will be erased.
4)To program the second, third or fourth transmitter codes, repeat step 3. As each transmitter
is learned, the long confirmation siren chirp will be followed by two short chirps for
Page - 50
transmitter number two, three short chirps for transmitter number three, and four short
chirps for transmitter number four. An attempt to add any further transmitter codes will be
ignored.
5)Turning off the ignition switch or 10 seconds of no programming will automatically turn
off the transmitter learning code program, which is confirmed by two long siren chirps.
Whenever a transmitter is coded into the security system, whether an existing one or
previously unknown transmitter, the siren will chirp for two seconds every time the ignition
is turned "on", for a period of 48 hours. Additionally, the Visual Deterrent LED will flash and
the Digital Status Indicator will show the number of transmitters which can operate the system
for 90 seconds instead of 10 seconds. This operation is the Automatic Transmitter
Verification
TM
feature, which protects the system from someone programming an unauthorized
transmitter to operate the system.
Remember, up to four different security systems may be operated by each transmitter by
taking advantage of its ability to change banks, as described on Page 11.
This device complies with FCC Rules part 15. Operation is subject to the following two
conditions, (1) This device may not cause harmful interference and, (2) This device must
accept any interference that may be received, including interference that may cause undesired
operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate
the equipment.
L I M I T E D L I F E T I M E W A R R A N T Y
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are
warranted to be free from defects in materials and workmanship under normal use. If a product sold by the Company
proves to be defective, the Company will repair or replace it free of charge within the first year and thereafter all parts
to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and return
shipping, to the original owner during the lifetime of the car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc., P.O.
Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is nontransferable
and does not apply to any product damaged by accident, physical or electrical misuse or abuse, improper installation,
alteration, any use contrary to its intended function, unauthorized service, fire, flood, lightning, or other acts of God.
This warranty limits the Company's liability to the repair or replacement of the product. The Company shall
not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or any
incidental or consequential damages caused by any failure or alleged failure of the product to function properly. Under
No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A Guarantee Or Insurance
Policy Against Loss. The Company neither assumes nor authorizes any person or organization to make any Warranties
or assume any liability in connection with the sale, installation, or use of this product.
MO_EG-1800ATV
