Page - 33
the door is shut, upon which it will resume flashing fast, or, the ignition is turned
"on", which will extinguish the light.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that Automatic Re-
arming is ON. Pressing the small center button will turn this Feature OFF, with the
system's response being two siren chirps (or horn honks).
4)
Starter Interrupt 90 Seconds After Ignition "Off" Or Disarming: Default OFF.
Activating this Feature will cause the Starter Interrupt output to automatically
engage 90 seconds after the ignition switch is turned "off", and also 90 seconds after
disarming the system. This automatic engagement will occur even if the security sys-
tem is in a disarmed state, but not if it is in Valet Mode. Once the Starter Interrupt
output is activated, the system must be armed, then disarmed with the transmitter, or
placed into the Easy Valet
TM
Mode by pressing and holding the Valet Switch for 2
seconds to disengage it.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that Automatic Re-
arming is ON. Pressing the small center button will turn this Feature OFF, with the
system's response being two siren chirps (or horn honks).
5)
Doors Lock Upon Last Door Arming: Default OFF. This Feature may only used if
Feature #2, Last Door Arming, is utilized. Activating this Feature will add the lock-
Page - 34
ing of the doors when the security system automatically arms 30 seconds after the
vehicle's last door is closed. If this Feature is not activated, the system will still auto-
matically arm (if Feature #2 is ON), but the doors will not automatically lock. Con-
nection of a power doorlock interface is required for this Feature.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that Automatic Re-
arming is ON. Pressing the small center button will turn this Feature OFF, with the
system's response being two siren chirps (or horn honks).
6)
Doors Lock Upon Automatic Rearming: Default OFF. This Feature may
only
used if Feature #3, 90 Second Automatic Rearming, is utilized. Activating this Fea-
ture will add the locking of the doors if the security system automatically rearms 90
seconds after being disarmed from the transmitter. If not activated, the system will
still automatically rearm (if Feature #3 is ON), but the doors will not automatically
lock. Connection of a power doorlock interface is required for this Feature.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (os horn honk) to indicate that this Feature is
ON. Pressing the small center button will turn this Feature OFF, with the system's
response being two siren chirps (or horn honks).
7)
Doors Lock Upon Ignition "On": Default ON. This Feature, when activated, will
cause the security system to automatically lock the vehicle's doors 1.75 seconds after
the ignition switch is turned "on" (connection of a doorlock interface is required).
Page - 35
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF.
Pressing the large upper button will turn this Feature ON, with the system's response
being a single siren chirp (or horn honk).
8)
Unlock #1 Upon Ignition "Off": Default ON. This Feature, when activated, will
cause the security system to automatically unlock either the driver's door or all of the
vehicle's doors instantly when the ignition switch is turned "off". Please note that the
exact operating parameters of the Feature depends upon the configuration of the
security system and your vehicle's power doorlocks. As noted on Page 9, this system
may be configured to unlock only the driver's door upon disarming. Then, if desired,
pressing the transmitter's large upper button again within 3 seconds will unlock all of
the doors. Therefore, this Feature can operate one of two ways: first, if all of the doors
unlock upon disarming, this Feature will unlock all of the doors when the ignition is
turned "off". Second, if your vehicle is configured to unlock the driver's door only
upon disarm, this Feature will unlock only that door upon disarming. Please consult
with the installer as to the feasibility of adding the driver's door only unlock configu-
ration to your vehicle, as power doorlocking systems differ in compatibility to this
Feature. If the second configuration discussed previously is present, the next Feature
allows the option of automatic unlocking of all of the doors when the ignition is
turned "off".
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's small center button. The system
Page - 36
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF.
Pressing the large upper button will turn this Feature ON, with the system's response
being a single siren chirp (or horn honk).
9)
Unlock #2 Upon Ignition "Off": Default ON. As discussed in the previous Feature,
your security system is capable of a second door unlock output. If your system is con-
figured to unlock the driver's door only upon disarming with the transmitter, this
Feature may be utilized. This Feature, when activated, will unlock all of the other
doors, after the driver's door, when the ignition switch is turned "off".
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF.
Pressing the large upper button will turn this Feature ON, with the system's response
being a single siren chirp (or horn honk).
10) Open Door Bypass For The 3 Previous Features: Default ON. This Feature cancels
any automatic doorlock operations associated with the ignition switch if a door is
open at the time the ignition switch is turned "on" or "off". For example, if the security
system is programmed to unlock the doors when the ignition is turned "off", if a door
is opened before turning the ignition "off", the doors will not unlock.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
28-29. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF.
Pressing the large upper button will turn this Feature ON, with the system's response
being a single siren chirp (or horn honk).
