background image

Page - 37

11) Confirmation Siren Chirps (Or Horn Honks) On/Off: Default ON. This Feature

allows full-time removal of the audible confirmation siren chirps (or horn honks).
Please note that silent arming or disarming may be done on a onetime temporary basis
by pressing the transmitter's small center button before pressing the large upper but-
ton.  Even if this Feature is used to remove the confirmation chirps (or honks), the
audible Automatic Transmitter Verification

TM

 feature will still operate.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's small center button.  The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF.
Pressing the large upper button will turn this Feature ON, with the system's response
being a single siren chirp (or horn honk).

12) Confirmation Siren Chirps (Or Horn Honks) While In Valet Mode: Default OFF.

While in Valet Mode, the system will still respond to the transmitter for the

  purpose

of remotely locking and unlocking the vehicle's doors. This Feature controls the
addition or elimination of an audible confirmation of the security system's response
while in Valet Mode. If activated, the system will have confirmation siren chirps (or
horn honks) if the transmitter is used to lock or unlock the while in Valet Mode.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's large upper button.  The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is
ON.  Pressing the small center button will turn this Feature OFF, with the system's
response being two siren chirps (or horn honks).

Page - 38

13) 30 Or 60 Second Activated Alarm Cycle: Default 60 Seconds. When an armed

security system is activated, this Feature determines how long the siren (or horn) will
sound, and how long the parking and dome lights will flash.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's small center button.  The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is
now set for a 30 second activated alarm cycle.  Pressing the large upper button will
return this Feature to a 60 second cycle, with the system's response being one siren
chirp (or horn honk).

14) Lights On 30 Or 5 Seconds Upon Disarm: Default 30 Seconds.  This Feature sets

the length of time that the parking and dome lights stay on upon disarming the secu-
rity system. The longer time allows inspection of the area around and inside the ve-
hicle when dark.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's large upper button.  The system
will respond with a single siren chirp (or  horn honk) to indicate that this Feature is
now set for a 5 second parking and dome light period.  Pressing the small center
button will return this Feature to a 30 second period, with the system's response being
two siren chirps (or horn honks).

15) Disarm System Upon Trunk Release: Default ON.  This Feature causes the security

system to automatically disarm when the small center button is pressed and held to
operate remote trunk release.  If this Feature is turned OFF, the trunk release will still
operate, but the system will remain armed.

Page - 39

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's small center button.  The system
will respond with two siren chirps (or  horn honks) to indicate that this Feature is
OFF.  Pressing the large upper button will turn this Feature ON, with the system's
response

being a single siren chirp (or horn honk).

16) Doorlock Pulse Time .8 Or 3 Seconds: Default .8 Second.  Some vehicle's power

doorlocking systems (example: pneumatic systems) require a longer output pulse to
operate properly. This Feature allows the installer the flexibility to accommodate such
systems without the added expense of an additional adaptor.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's small center button.  The system
will respond with two siren chirps (or  horn honks) to indicate that the doorlock
output pulse is now 3 three seconds.  Pressing the large upper button will return this
Feature to the .8 second pulse, with the system's response being a single siren chirp
(or horn honk).

17) Double Pulse Unlock (DPU

TM

): Default OFF.  This is another Feature provided for

the installer's benefit.  Some newer vehicles require a double pulse to remotely unlock
the doors and/or to disarm a factory-equipped security system.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's large upper button.  The system
will respond with one siren chirp (or horn honk) to indicate that the doorlock output
pulse is now a double pulse.  Pressing the small center button will return this Feature
to the single pulse, with the system's response being two siren chirps )or horn honks).

Page - 40

18) 3 Or 45 Second Arming Delay: Default 3 Seconds.  Some installation situations

require an extra period of time for the security system to become fully armed. Where
needed, this Feature may be changed by the installer to delay the full arming of the
system to 45 seconds. Please note when the 45 second arming delay is used, it adds 45
seconds to all three forms of arming: active arming from the transmitter, Last Door
Arming, and Automatic Rearming.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

28-29.  At Step 4, press and release the transmitter's small center button.  The system
will respond with two siren chirps (or horn honks) to indicate that the arming delay
is now 45 seconds.  Pressing the large upper button will return this Feature to the 3
second arming delay, with the system's response being a single siren chirp (or horn
honk).

19) Steady Siren Or Pulsed Horn Output: Default Steady Siren.   Instead of the siren,

if  the vehicle's horn is preferred, this Feature changes the output from steady to
pulsed, allowing the use of the horn for the alarm's audible responses.  If the vehicle
does not utilize an existing horn relay, one must be added or this output's 1 Amp
capacity may be exceeded, which will damage the alarm. This Feature is defaulted to
Pulsed Horn, but set for Steady Siren at the factory. The electronic siren requires a
continuous, steady output, which this Feature accommodates. The siren features six
different siren tones, which change every 5 seconds. When configured for use with a
horn, this output pulses for 10 seconds, then pauses for 5 seconds, repeating this cycle
for the duration of the activated alarm period. This prevents the horn from overheat-
ing, thereby ensuring a maximum useful horn life to the vehicle owner.

To change the system from the default setting, follow Steps 1, 2, and 3 on Pages

Содержание Excalibur Gold 1600atv













Отзывы: