9
AUXILIARY FUNCTIONS 1-4
:
The actual operation of these functions will vary from car to car� They are designed
to operate extra vehicle functions like automatic sliding doors or motorized hatches.
Aux 1-4 are virtual outputs only available on certain vehicles when this system is
integrated with the vehicle’s data network. Consult your installer to find out if any of
these functions are available for your vehicle. If so, confirm each operation with the
controller and write each function in the blank spaces provided below�
-
Auxiliary 1 Function (___________________)
: To activate this function, press
and release the “
trunk
” and “
start
” buttons simultaneously�
-
Auxiliary 2 Function (___________________)
: To activate this function, press
and release the “
lock
” and “
trunk
” buttons simultaneously�
-
Auxiliary 3 Function (___________________)
: To activate this function, press
and release the “
unlock
” and “
start
” buttons simultaneously�
-
Auxiliary 4 Function (___________________)
: To activate this function, press
and release the “
unlock
” and “
trunk
” buttons simultaneously�
Controller & Transmitter Functions (cont’d)
Other Remote Start Features
It is typically recommended that vehicles equipped with turbocharged engines allow
the engine to idle for after driving to cool the turbocharger� When this Installer Pro-
grammable Feature (#10) is enabled, the system will automatically keep the engine
running as follows:
• With the engine running, hold the brake pedal and engage the parking
brake� When the brake pedal is released, the system will keep the engine running for
the programmed time (1, 2, or 3 minutes), and then automatically turn it off�
• The system may be locked while the engine is running� Turbo Timer can be
prevented from engaging, or “bypassed” if desired, by turning the engine off before
engaging the parking brake, or if it’s already engaged, step on the brake pedal to turn
the engine off�
This feature will automatically start the engine if the vehicle battery drops below 11
volts or the interior temperature drop to 15 (or 32) degrees fahrenheit� You must acti-
vate these features each time you park your car to use them� They can be activated
one of two ways:
Method 1 - Valet Switch
• Turn the ignition switch “on”, then “off” (engine not running), and within 7 seconds
press the valet switch twice� If there is a 2 second delay without additional valet but-
ton presses, the horn will honk 3 times activating low voltage start mode�
• To activate low temp starting, enter low voltage start mode as described above
but, before the horn honks, press the valet switch 1 time (15 degrees) or 2 times (32
degrees) within 5 seconds. The horn will honk to confirm your selection.
Method 2 - With The Controller (Low Volt + Low Temp - 15 Degrees Only)
• Within 5 seconds of pressing LOCK, press the START button� You will get one chirp
and the 2-way controller will alternate between “ARM” and “RS AUTO”�
NOTE:
When low temp start mode is activated, low voltage start is also activated�
These features will operate once every two hours until the ignition key is turned “ON”�
LOW BATTERY/LOW TEMP AUTOMATIC STARTING
TURBO TIMER FEATURE
Содержание AL-2060-EDPB
Страница 28: ...Back Cover Color cover is in a separate file...