Excalibur AL-2060-EDPB, Руководство по эксплуатации

Страница: 25 / 28

25
Installer Programmable Features (cont’d)
Feature #11 - Manual Transmission Mode
On (press “ lock ” button to program)
Off
(press “
unlock
” button to program)
- DEFAULT
This feature changes the parameters of the system’s remote start operation to be suitable for
manual transmission-equipped vehicles via a “setup” procedure which must be followed upon exit -
ing the vehicle to ensure the transmission is in neutral�
Feature #10 - Turbo Timer
Off (press “ lock ” button to program) - DEFAULT
Run 1 Minute (press “ unlock ” button to program)
Run 2 Minutes (press “ trunk ” button to program)
Run 3 Minutes (press “ start ” button to program)
This feature, the operation of which is described on page 8, when turned on
configures the system to automatically keep the engine running briefly after the key is turned
off. This operation is designed specifically for vehicles with turbocharged engines. NOTE: This
feature is dependent on the proper wiring of the neutral safety circuit.
Feature #13 - Alarm Functions
On (press “ lock ” button to program) - DEFAULT
Off (press “ unlock ” button to program)
This feature converts the system into a strictly Keyless Entry/Remote Start System by eliminating
all antitheft alarm-oriented operations and features�
Feature #14 - Pulse Ignition On Disarm
On (press “ lock ” button to program)
Off (press “ unlock ” button to program) - DEFAULT
This feature will pulse the ignition and activate any attached immobilizer bypass module for
vehicles that require the ignition to be turned on to disarm the OEM alarm�
Feature #15 Lock On Prewarn
On (press “ lock ” button to program) - DEFAULT
Off (press “ unlock ” button to program)
This feature will automatically lock the doors to combat unauthorized entry from lock picking when
the prewarn zone is triggered.
Feature #12 Data Port Protocol
Green: DBI, Black: DBI (press “ lock ” button to program)
Green: iData, Black: iData (press “ unlock ” button to program)
Green: DBI, Black: iData (press “ trunk ” button to program)
Green: iData, Black: DBI (press “ start ” button to program)
Auto-Detect: (press “ lock ” & “ unlock ” buttons to program) - DEFAULT
This feature determines which data protocol is used on each data port� By default, this feature
shouldn’t need to be changed� With everything installed and connected to the data ports, upon the
first remote start attempt, each port will auto-detect the type of device connected and choose the
proper protocol. This can also be configured manually. NOTE: When a BLADE is inserted, the
black data port automatically switches to iData protocol.