background image

 

 

 

ECOFLUSH

FULLFLUSH

Water
timing

5

 

Operation

 

 
 

5.0  

Flushing and pumping out 

 
The operation of the toilet is very easy. By simply pressing one of the two buttons (see pos. 5.1) on 
the control panel, the flushing program will be started. The solenoid will be opened and water will 
flow into the bowl. After a few seconds, the powerful centrifugal macerating pump will be started 
to break down the waste and pump out the waste together with the water in the bowl. The 
complete program will take 12-29 seconds. 
 
 

5.1  

Selecting water quantity (“ECOFLUSH” or “FULLFLUSH”) 

 
The program offers the choice to flush the toilet with two water quantities. The two buttons on the 
control panel offer the choice to flush with 3.4 – 6.2 ltrs of water. The choice of program may be 
subject to availability of water.   
 
When pressing the left button (ECOFLUSH) on the 
control panel, the shorter programs will be started 
and 3.4, 3.8, 4.2 or 4.9 ltrs of water will be used.   
When pressing the right button (FULLFLUSH) on the control 
panel, the longer programs will be started and 4.7, 4.9, 5.3 or 
6.2 ltrs of water will be used. 
 
 

5.2  

Emergency operation 

 
This toilet is equipped with an emergency button. With this button the pump can be activated to 
empty the bowl without allowing water into the bowl first. This emergency operation can be used 
when the water supply to the toilet is interrupted. When pouring water into the bowl by hand, the 
toilet can still be used. 
 
 

5.3  

Reverse rotation 

 
This toilet is equipped with a reverse rotation button. This button will allow you to reverse the 
rotation of the pump. This may come handy in case the pump is blocked as a result of articles, 
other than those that the toilet was designed for, being put into the toilet. By pressing this button, 
the rotation of the pump is reversed and the debris that blocked the pump will be returned to the 
bowl allowing you to remove it without taking the toilet apart. Test run the toilet again with just 
water to make sure all debris has been pumped out.  
 
 
 
 
 
 
 
 
 
 
 
 
 

Users manual Exalto toilet Page 9

Содержание 30050.12

















Отзывы: