4 Operation and use
4.1 Preparation for first use
If the wiper has been installed and been adjusted, the system can be prepared
for first use. We recommend a thorough inspection of the system to ensure
proper operation.
Check:
• if there are no leaks where the shafts go through the bulkhead;
• if the wiping arc cleans the entire window;
• if the park position is correct.
If the wiping arc or the park position is wrong, adjust them again. Follow the
procedure in paragraph 5.3.
4.2 Use
All Exalto windshield wipers are provided with the following functions:
• low speed;
• high speed;
• self parking.
Do not use the wiper on a dry window; excessive wear of the blades and the
motor can occur in this case. Clean the wiper arm frequently with fresh water
(see also paragraph 5.1).
Because of the big variety of wiper switches, we refer to the user manual of the
installed switch to learn about the functions of that specific switch.
11
