Safety
Exalto windshield wipers are easy to install, yet a fair amount of technical
knowledge (mechanical and electrical) is required of the installer. Please
consult the manual or contact your vendor in case of doubt during installation
or malfunctioning.
Safety symbols
An exclamation mark in front of the text warns you, that injury or damage can
occur if a procedure is badly performed.
Dangers
The installation and use of Exalto wipers will not inflict any personal dangers or
damage, provided that installation is done according to the procedures
specified in the manual.
• Never remove covers or other safety provisions, unless maintenance is being
performed and all safety requirements are obeyed.
• The installer must provide all necessary covers.
• Always disconnect the electrical circuit when performing maintenance.
Prevent the installation from being started (accidentally) by others.
Safety provisions
The safety provisions will protect the user against contact with moving,
electrical or hot parts. Some of them have to be provided by the installer.
There are several safety provisions:
• This wiper comes complete with a built-on cover. It prevents users from direct
contact with moving parts of the motor. Never remove this safety provision.
• Make sure the wiper has enough ventilation when placing it behind a panel
or cover.
• Place a fuse (see specifications) in the main cable.
Safety requirements
Before the Exalto wiper is installed, we strongly recommend the following:
• Read the entire manual before installation.
• Make sure your working environment as well as the wiper parts are clean.
• Check to be sure no parts are missing or damaged.
• Use only high quality tools and have them within reach when installing.
• Handle the parts with care.
2
!
!
!