90°
86 103 117 132 146 161 176 190 205 220 234 249 264 278 293
263
250
105
85°
92
79
119 132 145 158
197
184
171
210 223 236
94
80°
82
70
105 117 129 140
175
164
152
187 199 211 222 234
83
75°
73
62
93
104 114 124
155
145
135
165 176 186 196 207
73
70°
63
55
81
90 100 109
136
127
118
145 154 163 172 181
63
65°
55
47
71
79
86
94
117
110
102
125 133 141 149 157
54
60°
47
40
60
67
74
80
100
94
87
107 114 121 127 134
45
55°
40
34
51
57
62
66
85
79
74
90
96 102 107 113
36
50°
33
26
43
47
52
56
70
66
61
75
80
84
89
94
30
45°
27
23
35
38
42
46
57
53
50
61
65
68
72
76
25
40°
21
19
26
30
34
37
45
43
40
48
51
54
57
60
400
Armlength (L)
350
300
450 500 550 600
750
700
650
800 850 900 950 1000
Determining the vertical displacement of the wiper blade
W
ipe ar
c
Vertical displacement of the blade (H)
Units in mm
Length of wiper blade = 0.9 * 2 * (E - H)
5.5 Disassembly and assembly
Prevent injuries when disassembling: disconnect the wiper from the power
supply. Keep all necessary tools within reach and remember the chapter on
safety. Provide well protected packaging, if you’re going to stock or transport
the wiper assembly.
5.5.1 Removing the wiper assembly from the bulkhead
1. Disconnect all the electric connections of the wiper.
2. Remove the wiper arms.
3. Remove the nuts (19, 12, 21) and plates (16, 17) on the outside.
4. Remove the wiper from the holes in the bulkhead.
5. If you want to replace the wiper, follow chapter 3.
5.5.2 Disassembling the drive crank lever
1. Disconnect all the electric connections of the wiper.
2. Remove the wiper from the bulkhead; (see 5.5.1).
3. Unscrew the nut and bolt on the drive crank-lever and remove the lever.
4. For adjusting the wiping arc and replacing, follow section 5.3.
5.5.3 Removing the motor from the wiper assembly
1. Disconnect all the electric connections of the wiper.
2. Remove the wiper arm.
2. Disassemble the drive crank lever (9) (see 5.5.2).
3. Unscrew the motor and remove it.
4. When replacing, screw the motor on the housing. Follow section 5.3 to
install the drive crank lever in the correct park position.
14
