EWM TIGSPEED OSCILLATION DRIVE 45 COLDWIRE Скачать руководство пользователя | Manualshive

Страница: 40 / 67

background image

Design and function

Transport and installation

40

099-000237-EW501

25.04.2019

• Tighten the Allen screw (8 mm) in the clockwise direction to increase the braking effect.

Tighten the spool brake until the wire spool no longer turns when the wire feed motor stops but
without it jamming during operation!

5.1.12 Shielding gas supply (shielding gas cylinder for welding machine)

5.1.12.1 Connecting the shielding gas supply

WARNING

Risk of injury due to improper handling of shielding gas cylinders!
Improper handling and insufficient securing of shielding gas cylinders
can cause serious injuries!

• Place shielding gas cylinder into the designated holder and secure with

fastening elements (chain/belt)!

• Attach the fastening elements within the upper half of the shielding gas

cylinder!

• The fastening elements must tightly enclose the shielding gas cylinder!

An unhindered shielding gas supply from the shielding gas cylinder to the welding torch is a fun-
damental requirement for optimum welding results. In addition, a blocked shielding gas supply
may result in the welding torch being destroyed.
• Always re-fit the yellow protective cap when not using the shielding gas connection.
• All shielding gas connections must be gas tight.

«
...
38
39
40
41
42
...
»

Содержание TIGSPEED OSCILLATION DRIVE 45 COLDWIRE




































































Отзывы:

Нет отзывов

Похожие инструкции для TIGSPEED OSCILLATION DRIVE 45 COLDWIRE

Бренд: WEG Страницы: 2

Бренд: NATURE & DECOUVERTES Страницы: 2

PROVANTAGE 4500

Бренд: Warn Страницы: 18

FPE-CRR-20-0806

Бренд: Fleece Страницы: 3

Бренд: EHEIM Страницы: 140

Car Vision 2020 HD

Бренд: Defender Страницы: 8

Бренд: Dee Zee Страницы: 2

Бренд: Sanotechnik Страницы: 56

Бренд: Vaultek Страницы: 19

Бренд: Conrad Страницы: 2

Бренд: Airaid Страницы: 2

Бренд: VIGO Страницы: 14

Бренд: JABSCO Страницы: 9

B124 Tone Control

Бренд: EMG Страницы: 2

Бренд: DITEC Страницы: 30

Бренд: Marineland Страницы: 2

RB491200 - annexe 2

Бренд: Gaggenau Страницы: 26

Бренд: Hagen Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды