Functional characteristics
Organising welding tasks (Mode "JOB Manager")
38
Item No.: 099-000155-EWM01
5.6.7
Specifying max. no. of accessible JOBs
This function can be used to specify the maximum number of JOBs which can be retrieved from the free
memory. The factory setting is for 10 JOBs to be accessible on the welding machine, but this figure can
be increased to up to 128 if required.
The first JOB in the free memory is JOB 129. With the factory setting of 10 JOBs, this equates to JOB
numbers 129 to 138. The first JOB can be set as required.
NOTE
This function can be used to specify the maximum number of JOBs which can be
retrieved from the free memory. The factory setting is for 10 JOBs to be accessible on the
welding machine, but this figure can be increased to up to 128 if required.
The first JOB in the free memory is JOB 129. With the factory setting of 10 JOBs, this
equates to JOB numbers 129 to 138. The first JOB can be set as required.
The setting of the max. number of JOBs is intended solely for torch modes 4, 5 and 6 or
14, 15 and 16 (no tapping function).
The following graphic gives an example with the settings for max. JOBs available = 5 and first available
JOB = 145. This gives the available JOBs 145 to 150.
Job 129...
...192...
145...
...150
...256
Figure 5-9
