Machine description
TETRIX 1002 DC SYNERGIC
Item No.: 099-000155-EWM01
17
Item Symbol Description
0
1
Machine control
See Machine control – operating elements chapter
2
0
1
Key switch for protection against unauthorised use
Position “1” > changes possible,
Position “0” > changes not possible.
Please take note of chapter “Key switch”
3
Main switch, machine on/off
4
"Operating state" display
Lights up when the machine is switched on and ready for operation
5
"Fault" display
"Collective interference" signal light
If the signal light is on, the power unit is automatically switched off. Because some
interference is short-term and one-off (e.g. excess mains voltage), the signal light will
go off again and the welding machine will be ready for welding. If the signal light is still
on after a reasonable amount of time, see the chapter on “O
perating errors
, causes
and remedies”.
6
Arc is burning (welding current flows)
7
COM
PC interface, serial (D-SUB connection socket, 9-pole)
8
7-pole connection socket (digital)
For connecting digital accessory components
9
19-pole connection socket (digital)
Operating panel connection lead connection
10
ROB XX2 pallet
Transport pallet (option)
