EWM PHW 100 Скачать руководство пользователя страница 7

Страница: 7 / 36

Intended use

Applications

099-008232-EW501

26.05.2020

Intended use

WARNING

Hazards due to improper usage!

The machine has been constructed to the state of the art and any regulations and

standards applicable for use in industry and trade. It may only be used for the welding

procedures indicated at the rating plate. Hazards may arise for persons, animals and

material objects if the equipment is not used correctly. No liability is accepted for any

damages arising from improper usage!

• The equipment must only be used in line with its designated purpose and by trained or

expert personnel!

• Do not improperly modify or convert the equipment!

3.1 Applications

Welding torches for arc welding systems for plasma welding.

3.2 Documents which also apply

3.2.1 Warranty

For more information refer to the "Warranty registration" brochure supplied and our information regarding

warranty, maintenance and testing at

www.ewm-group.com

3.2.2 Declaration of Conformity

This product corresponds in its design and construction to the EU directives listed in the decla-

ration. On request, we will send you the relevant original declaration of conformity.

3.2.3 Service documents (spare parts)

WARNING

Do not carry out any unauthorised repairs or modifications!

To avoid injury and equipment damage, the unit must only be repaired or modified by

specialist, skilled persons!

The warranty becomes null and void in the event of unauthorised interference.

• Appoint only skilled persons for repair work (trained service personnel)!

Spare parts can be obtained from the relevant authorised dealer.

Содержание PHW 100





































Результаты поиска

Содержание PHW 100

Отзывы:

Похожие инструкции для PHW 100

Бренды по названию

Популярные бренды

EWM PHW 100, Руководство по эксплуатации

Результаты поиска

Содержание PHW 100

Отзывы:

Похожие инструкции для PHW 100

Бренды по названию

Популярные бренды