Rectifying faults
Warnings
099-005630-EW501
02.03.2021
43
Warning
Possible cause / remedy
16
Protective gas warning
Check the gas supply.
17
Plasma gas warning
Check the gas supply.
18
Forming gas warning
Check the gas supply.
19
Gas warning 4
reserved
20
Coolant temperature warning Check coolant level and top up if necessary.
21
Excess temperature 2
reserved
22
Excess temperature 3
reserved
23
Excess temperature 4
reserved
24
Coolant flow warning
Check coolant supply.
Check coolant level and top up if necessary.
Check flow and switching thresholds.
[2]
25
Flow 2
reserved
26
Flow 3
reserved
27
Flow 4
reserved
28
Wire stock warning
Check wire feeding.
29
Low wire 2
reserved
30
Low wire 3
reserved
31
Low wire 4
reserved
32
Tacho error
Fault of wire feeder - permanent overload of the wire drive.
33
Wire feed motor excess current Excess current detected on wire feed motor.
34
JOB unknown
JOB selection was not performed because the JOB number is
unknown.
35
Wire feed motor slave excess
current
Excess current detected on wire feed motor slave (push/push
system or intermediate drive).
36
Slave tacho error
Fault of wire feed unit - permanent overload of the wire drive
(push/push system or intermediate drive).
37
FST bus failure
Wire feed unit not connected (reset wire feed motor automatic
cutout by pressing).
38
Incomplete component informa-
tion
Check XNET component management.
39
Halfwave failure
Check supply voltage.
[1]
only for XQmachine series
[2]
See technical data for values and other switching thresholds
> see 8 chapter
.
